Welcome and thank you for choosing our soy wax bead sandblasted candles. This guide will provide you with all the information you need to use your candle optimally, to ensure a pleasant, safe and prolonged experience.
The composition of our candle sand
Our sand candles are made of 100% natural and unscented soy wax beads, for a clean and ecological burn. The wicks included are waxed cotton wicks, without additives, ensuring a stable and uniform flame. Our resin containers are strong, reusable and heat resistant, for a decorative appearance and increased safety.
Before the first usage
To ensure the best performance of your candle, please follow these steps:
1. Container filling:
• Fill the resin container until the surface of the beads is slightly below the rim. This will prevent the wax from overflowing when the candle is lit.
• Do not compress the beads; allow them to settle naturally in the container.
2. Positioning the Wick:
• Make sure the wick is centered in the wax sand before lighting. This will ensure an even burn.
• If necessary, re-center the wick by gently moving it before lighting.
3. Preparing the Wick:
• Trim the wick to about 0.5 cm in height before lighting the candle for the first time. This will prevent a high flame or smoke.
Lighting and use of this candle type
To get the most out of your candle, here are some tips:
1. Initial Lighting:
• Use a long match or lighter to light the wick. Bring the flame close to the base of the wick for quick lighting.
• Let the candle burn until the wax sand surface has completely melted and forms a "pool" of liquid wax across the width of the container. This prevents tunneling and ensures uniform combustion during subsequent uses.
2. Maximum Burn Time:
• For each session, do not leave the candle lit for more than 3 to 4 hours. Burning for too long can cause the container to overheat.
3. Extinguishing the Candle:
• To extinguish the candle, use a candle snuffer or gently blow on the flame. Avoid drowning it in liquid wax to preserve the wick.
• Gently recenter the wick if necessary when the wax is still soft for the next use.
Maintenance and Safety
Some good practices for safe and prolonged use:
1. Wick Maintenance:
• Before each use, trim the wick to about 0.5 cm to avoid smoke and a flame that is too large.
• Make sure the wick remains centered for uniform combustion.
2. Replenishing Wax Sand:
• Once the wax has completely melted during a session, you can add additional wax beads to extend the life of your candle.
• Never add wax sand while the candle is lit to avoid any risk of splashing or high flames.
3. Safety:
• Never leave a burning candle unattended.
• Keep the candle out of reach of children and pets.
• Place the candle on a stable, heat-resistant surface and away from drafts, flammable objects and curtains.
• If the flame becomes too high or smoky, extinguish the candle, trim the wick, and relight it.
Reuse and Recycle
When your candle is completely consumed:
1. Cleaning the Resin Container:
• Wait until the container has completely cooled.
• Remove any remaining wax and wick, then gently wash the container in warm, soapy water.
• You can reuse the container for a new candle, to hold new wax beads, or as a decorative item.
2. Refilling with New Beads:
• If you want to extend the life of your candle, simply refill the container with new wax beads and reposition a new wick.
Frequently Asked Questions (FAQ)
Q: My candle burns unevenly, what should I do?
A: Make sure the wick is centered and trim it regularly. Let the candle burn long enough for the surface to melt evenly.
Q: Can I use other types of wax in the resin container?
A: Our candles are designed specifically for soy wax beads. Using another type of wax could affect the quality of the burn.
Q: What should I do if the flame becomes too small?
A: Trim the wick slightly and make sure the wax beads are not compressed around the wick.
For any further questions, please do not hesitate to contact us. Enjoy your moments of relaxation with our sandblasted candles!